OE 31368636 Automoitve Oil Cooler For V40 V60 S60 V70 S90

Product Description:

Automoitve Oil Cooler For V40 V60 S60 V70 S90 OE 31368636

Quick Details:

 
Detailed Description Of Oil Cooler:

This is a liquid-liquid heat exchanger. The heat is oil and the coolant is water. Typically, the oil in this heat exchanger enters the tube and the water enters the shell. Countercurrent heat transfer is usually used, that is, the oil outlet and the water inlet are at the same end of the heat exchanger. Because the heat exchange between oil and water is very good, the total heat transfer coefficient should not be less than 1000 W/m2-K, so the design should be quite compact, and the oil can be cooled to the inlet water temperature plus a few degrees Celsius (e.g. 5 degrees). The actual cooling effect depends on the water/oil flow ratio. The greater the water flow, the better the cooling effect.

The oil cooler must be replaced in time if it is broken, otherwise it will lead to serious consequences. The role of the oil cooler is to cool the lubricating oil and keep the oil temperature within the normal working range. On high-power reinforced engines, oil coolers must be installed because of the large heat load. When the engine is running, as the temperature increases, the oil viscosity becomes thinner, reducing the lubrication ability. Therefore, some engines are equipped with oil coolers, whose role is to reduce the temperature of the oil, so that the lubricating oil to maintain a certain viscosity. The oil cooler is arranged in the circulating oil circuit of the lubrication system.

If the oil cooler is broken, the oil will have continuous high temperature, and the system will also issue an alarm that the oil temperature is too high. In this case, the use of the vehicle will cause the oil to be unable to effectively lubricate the engine, aggravate the internal wear of the engine, greatly reduce the engine performance, shorten the service life of the engine, and even cause engine damage in serious cases.

Product Photo:
 

 
Company Profile:
  
Established in Guangzhou China, Womala Autoparts as a comprehensive company with five branches has engaged in for for parts for more than 10 years. There are hundreds of professional staff working in our supply department, sales and logistic support departments. Thanks to the deep cooperation with over 50 factories including 5 joint-stock companies, we have provided a variety of reasonable product solutions and reliable market information constantly to clients around the world over the past ten years.


 

 
FAQ:
 
Q1. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.We can build the moldsand fixtures
 
Q2. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have topay the sample cost andthe courier cost
 
Q3. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery. We pay attention on good quality