Place of Origin:
China
Brand Name:
Womala
Certification:
.
Model Number:
LR035726
Product Overview
The Mass Air Flow (MAF) Sensor LR035726 is a genuine OE-grade engine management component for select for Land Rover and for Jaguar vehicles. Installed in the intake tract after the air filter, it measures the volume and density of incoming air and transmits this data to the Engine Control Unit (ECU) for precise air-fuel mixture calculation. This unit features a 5-pin connector and includes an integrated air temperature sensor. C2D19537 is the Jaguar equivalent part number.
Key Features
Hot-film sensor technology – provides rapid, precise air measurement for accurate fueling
Integrated air temperature sensor – combined intake air temp measurement in one unit
5-pin connector – matches factory wiring harness
With housing – complete assembly ready to install
OE-grade quality – manufactured to original equipment specifications
OE Cross-Reference
| Land Rover OE | Jaguar OE | Additional References |
|---|---|---|
| LR035726 | C2D19537 | CPLA12B579AA |
Technical Specifications
| Parameter | Detail |
|---|---|
| Part Type | Mass Air Flow (MAF) Sensor / Air Mass Meter |
| Connector | 5-pin |
| Housing Type | With housing |
| Integrated Sensor | Air temperature sensor |
| Housing Length | Approx. 97 mm |
| Housing Diameter | Approx. 69 mm |
| Condition | Brand New, OE-Grade |
Vehicle Fitment
| Make | Model | Chassis / Series | Years | Engine |
|---|---|---|---|---|
| for Land Rover | LR4 / Discovery 4 | L319 | 2014 – 2016 | 3.0L V6 Gas |
| for Land Rover | Discovery 5 | L462 | 2017 – 2020 | 3.0L V6 Gas / Diesel |
| for Land Rover | Range Rover | L405 | 2014 – 2021 | 3.0L V6 Gas / Diesel |
| for Land Rover | Range Rover Sport | L494 | 2014 – 2021 | 3.0L V6 Gas / Diesel |
| for Land Rover | Range Rover Velar | L560 | 2018 – 2020 | 3.0L V6 Gas |
| for Jaguar | XF, XJ, XE, F-PACE, F-TYPE | — | 2013 – 2021 | 3.0L V6 Petrol |
Engine details (verify with VIN):
3.0L V6 Supercharged Petrol (AJ126)
3.0L V6 Diesel (TDV6 / SDV6)
⚠️ Important: This MAF sensor is confirmed for 3.0L V6 petrol and diesel engines. For 5.0L V8 supercharged and other engine variants, verify compatibility with your VIN.
Signs of Failure
Check engine light – MAF-related DTCs
Rough idle or stalling – incorrect air-fuel mixture
Reduced fuel economy – inefficient combustion
Loss of power / hesitation – poor acceleration and performance
💡 A faulty MAF sensor directly affects the air-fuel mixture calculation, resulting in reduced efficiency and increased fuel consumption.
Critical – Verify Your VIN Before Ordering
MAF sensors are VIN‑ and engine‑specific. Variations in engine type (3.0L petrol vs. diesel vs. 5.0L V8) and production date affect fitment. Provide your VIN – our team confirms exact compatibility before dispatch. We cannot accept returns for misordered parts without VIN verification.
💡 Installation Tip: Professional installation recommended. Inspect the air filter and intake tract for contamination before fitting. Clear any fault codes after installation.
Why Choose Us
| Advantage | Detail |
|---|---|
| Inventory | 10,000+ SKU in stock |
| Quality | OE-grade, fully tested |
| Warranty | 18-month against manufacturing defects |
| Shipping | Global via DHL / UPS / FedEx |
| Flexibility | Sample orders welcome, low MOQ |
Contact us for bulk orders or VIN‑checked quotes.
Specifications subject to change; images for reference only.Aftermarket replacement – not affiliated with Jaguar Land Rover.
![]()
![]()
Frequently Asked Questions
A: Signs of a failing bumper bracket include visible damage or deformation, misaligned bumper panels, unusual noises from the front end, or if the bumper appears loose or sagging on one side.
A: For optimal results, we recommend professional installation. Key considerations include ensuring proper alignment of all mounting points, checking for additional damaged components, and verifying all fasteners are properly torqued to specification.
![]()
![]()
Send your inquiry directly to us