Womala Front Left Lower Rearward Control Arm Oe LR113304 for Land Rover Range Rover Vogue 2018

Product Overview

The Front Lower Left Control Arm LR113304 (current replacement LR148057) is an OE-grade suspension component engineered for the front left lower rearward position on select for Land Rover vehicles. Also known as a front suspension arm or wishbone, this component connects the front wheel hub to the subframe, controlling wheel geometry and absorbing road forces for stable handling and even tyre wear .

LR148057 is the current replacement part number, with LR099105, LR099109, LR113304, LR126099, LR133982, LR148057, and LR161225 all listed as interchangeable references for the same arm .

⚠️ Important: This is the left-hand (LH) front lower rearward control arm. Mounting bolts and nuts cannot be reused — new hardware is required . This arm is serviced as a complete assembly — individual bushings and ball joints are not replaced separately .

Key Features

• Complete assembly – includes ball joint and bushings pre-installed 

• Forged steel construction – durable material with high load capacity 

• Front left lower rearward position – driver side 

• OE-grade quality – available as Genuine Land Rover and quality aftermarket alternatives (NAPA, Reinhoch, Lemförder)

• Direct-fit replacement – matches factory mounting points and suspension geometry

OE Cross-Reference

Aftermarket equivalents: NAPA NST2767 · Reinhoch RH04-5077 · Lemförder · Teknorot LA-449

Technical Specifications

Vehicle Fitment

Engine compatibility (verify with VIN): 3.0L SDV6 / TDV6 Diesel · 4.4L SDV8 Diesel · 5.0L V8 Petrol (NA & SC) · 3.0L SCV6 Petrol · 2.0L Si4 / SD4 · 3.0L D250 / D300 / D350 MHEV · 3.0L P360 / P400 MHEV · 2.0L P400e PHEV 

⚠️ Important: This is the left-hand (LH) arm. The right-hand counterpart is LR148059 (paired article number) . Confirm your vehicle‘s VIN and production plant before ordering.

Signs of Failure

• Knocking or clunking over bumps – worn bushings or ball joint 

• Vague or wandering steering – reduced handling precision 

• Uneven tyre wear – abnormal wear on inner tyre edge 

• Play in suspension joints – detectable movement where the arm meets the subframe or knuckle

💡 A worn front lower suspension arm usually shows as knocking over broken surfaces, vague or wandering steering, and uneven wear on the inner tyre edge. On a high-mileage vehicle, it is common to replace both sides together and reset the front alignment after fitting .

Critical – Verify Your VIN Before Ordering

Suspension control arms are VIN-, model-year-, and position-specific. Provide your VIN – our team confirms exact compatibility before dispatch. We cannot accept returns for misordered parts without VIN verification.

💡 Installation Tip: Professional installation recommended. Mounting bolts and nuts cannot be reused — new hardware is required . Perform a wheel alignment after installation. Replace in pairs if the opposite side is also worn. The front lower arm is serviced as a complete assembly — individual bushings and ball joints are not replaced separately .

Why Choose Us

Contact us for bulk orders or VIN‑checked quotes.

Specifications subject to change; images for reference only.Aftermarket replacement – not affiliated with Jaguar Land Rover.

Frequently Asked Questions

• Extensive Industry Experience: 13 years specializing in Auto Parts auto parts with precise product matching and technical solutions.
• Quality Assurance: 10-stage quality inspection process including durability testing, surface roughness analysis, and dimensional verification.
• Manufacturing Excellence: 15,000㎡ production base with 10,000+ SKUs in inventory for fast order fulfillment.
• Strategic Partnerships: Collaborations with 50+ factories including suppliers to international brands like Womala and Hella.