Womala Rear brake caliper motor LR036573 for Land Rover Range Rover Sport

Product Overview

The Electric Parking Brake (EPB) Actuator LR036573 is an OE-grade motor-gear unit engineered for the rear brake calipers on select for Land Rover vehicles. Mounted directly to each rear caliper, this actuator drives the caliper piston to clamp the brake pads against the disc and hold the vehicle when the parking brake is applied, then retracts to release. One actuator is fitted per rear caliper — two are required per vehicle.

⚠️ Critical Fitment Note: This is the 3-pin connector version used on 2013–2016/17 models. Later vehicles use a 2-pin version. You must check the connector on your existing motor before ordering.

Key Features

• Electric parking brake actuation – motor-gear unit that applies and releases the rear parking brake electrically

• Fits left and right rear calipers – same motor used on both sides

• 3-pin connector – matches early L405/L494 production

• OE-grade quality – available as Genuine Land Rover, TRW, Topran, and other quality alternatives

OE Cross-Reference

💡 Note: LR036573 is the primary part number. LR036567, LR036568, LR050775, and LR050776 are listed as superseded part numbers for the same actuator.

Technical Specifications

Vehicle Fitment

⚠️ Important: This actuator fits both left and right rear calipers. 2 units are required per vehicle for a complete rear axle replacement. VIN cut-off GA999999 applies — confirm your vehicle falls within range.

Signs of Failure

• Parking brake fault message – dashboard warning illuminated

• Brake won't fully apply or release – actuator fails to engage or disengage the parking brake

• Grinding noise on operation – internal gear wear

• Parking brake warning light – system malfunction indicator

💡 Parking brake actuators typically fail electrically or through internal gear wear. A failed actuator usually needs replacing as a complete unit — individual internal components are not serviced separately.

Critical – Verify Your VIN Before Ordering

EPB actuators are connector-specific (3-pin vs. 2-pin) and VIN-sensitive. Confirm your existing unit has a 3-pin connector before ordering. Provide your VIN – our team confirms exact compatibility before dispatch. We cannot accept returns for misordered parts without VIN verification.

💡 Installation Tip: Professional installation recommended. Disconnect the battery before replacement. After installing the new actuator, the parking brake system may require calibration or re-initialisation using diagnostic equipment. Inspect the caliper and connector for water ingress or corrosion during replacement.

Why Choose Us

Contact us for bulk orders or VIN‑checked quotes.

Specifications subject to change; images for reference only.Aftermarket replacement – not affiliated with Jaguar Land Rover.

Frequently Asked Questions

• Extensive Industry Experience: 13 years specializing in Auto Parts auto parts with precise product matching and technical solutions.
• Quality Assurance: 10-stage quality inspection process including durability testing, surface roughness analysis, and dimensional verification.
• Manufacturing Excellence: 15,000㎡ production base with 10,000+ SKUs in inventory for fast order fulfillment.
• Strategic Partnerships: Collaborations with 50+ factories including suppliers to international brands like Womala and Hella.