Place of Origin:
China
Brand Name:
Womala
Certification:
.
Model Number:
PHF500101
Product Overview
The Mass Air Flow (MAF) Sensor PHF500101 (superseding PHF500100) is a genuine OE-grade hot-wire air flow meter engineered for the 2.7L TDV6 diesel engine in select for Land Rover vehicles. Installed in the intake tract after the air filter, this sensor measures the mass of air entering the engine and transmits this data to the Engine Control Unit (ECU) to meter fuelling and manage the air/fuel ratio precisely.PHF500100 is the superseded part number; PHF500101 is the current replacement.
⚠️ Important: This MAF sensor is specifically for the 2.7L V6 TDV6 diesel engine. Later 3.0L diesel engines use a different sensor. Confirm your engine type and VIN before ordering.
Key Features
Hot-wire sensor technology – platinum sensor element for precise air measurement
Integrated air temperature sensor – combined intake air temp measurement in one unit
D-shape 4-pin connector – matches factory wiring harness
With housing – complete assembly ready to install, 132mm length × 90mm diameter
OE-grade quality – available as VDO, Intermotor, Kerr Nelson, Lemark, and other quality alternatives
OE Cross-Reference
| Primary | Superseded | Ford Cross-Reference | Aftermarket Equivalents |
|---|---|---|---|
| PHF500101 | PHF500100 | 4H229G820AA, 4H2Q12B579AC | VDO · Intermotor 19787 · Kerr Nelson EAM219 · Lemark LMF280 · ERA 558264 · Meat & Doria 86316 |
💡 Supersession Note: PHF500100 has been superseded by PHF500101. Both part numbers refer to the same MAF sensor for 2.7L TDV6 diesel applications.
Technical Specifications
| Parameter | Detail |
|---|---|
| Part Type | Mass Air Flow (MAF) Sensor / Air Mass Meter |
| Sensor Type | Hot Wire / Hot Film |
| Housing Type | With Housing |
| Housing Length | 132 mm |
| Housing Diameter | 90 mm |
| Connector | D-Shape, 4-pin |
| Integrated Sensor | Air Temperature Sensor |
| Weight | Approx. 0.272 kg |
| Condition | Brand New, OE-Grade |
Vehicle Fitment
| Make | Model | Chassis | Years | Engine | VIN Notes |
|---|---|---|---|---|---|
| for Land Rover | Discovery 3 / LR3 | L319 | 2005 – 2009 | 2.7L TDV6 Diesel | |
| for Land Rover | Discovery 4 / LR4 | L319 | 2010 – 2016 | 2.7L TDV6 Diesel | Early VINs only |
| for Land Rover | Range Rover Sport | L320 | 2005 – 2013 | 2.7L TDV6 Diesel |
Engine details (verify with VIN):
2.7L Lion V6 Diesel (276DT / TDV6) – 140 kW / 190 PS
⚠️ Important: This MAF sensor fits the 2.7L TDV6 diesel engine. For early Discovery 4 models, fitment is limited to early VINs only — later builds with the 3.0L engine use a different sensor. Confirm your engine displacement and VIN before ordering.
Signs of Failure
Loss of power – reduced engine performance due to incorrect air measurement
Poor fuel economy – increased fuel consumption from improper air-fuel mixture
Rough idle or hesitation – unbalanced combustion from faulty sensor readings
Check engine light – MAF-related diagnostic trouble codes
Black smoke from exhaust – rich fuel mixture due to over-fuelling
💡 A dirty or faulty MAF sensor sends incorrect air readings to the ECU, causing hesitation, poor economy, rough idle, or an engine warning light. Cleaning or replacing it restores correct fuelling.
Critical – Verify Your VIN Before Ordering
MAF sensors are VIN- and engine-specific. VIN cut-offs apply for Discovery 4 — confirm your vehicle falls within the early VIN range for the 2.7L TDV6 application. Provide your VIN – our team confirms exact compatibility before dispatch. We cannot accept returns for misordered parts without VIN verification.
💡 Installation Tip: Professional installation recommended. Inspect the air filter and intake tract for contamination before fitting. Ensure the D-shape 4-pin connector is securely attached. Clear any fault codes after installation.
Why Choose Us
| Advantage | Detail |
|---|---|
| Inventory | 10,000+ SKU in stock |
| Quality | OE-grade, fully tested |
| Warranty | 18-month against manufacturing defects |
| Shipping | Global via DHL / UPS / FedEx |
| Flexibility | Sample orders welcome, low MOQ |
Contact us for bulk orders or VIN‑checked quotes.
Specifications subject to change; images for reference only.Aftermarket replacement – not affiliated with Jaguar Land Rover.
![]()
![]()
Frequently Asked Questions
A: Signs of a failing bumper bracket include visible damage or deformation, misaligned bumper panels, unusual noises from the front end, or if the bumper appears loose or sagging on one side.
A: For optimal results, we recommend professional installation. Key considerations include ensuring proper alignment of all mounting points, checking for additional damaged components, and verifying all fasteners are properly torqued to specification.
![]()
![]()
Send your inquiry directly to us