Place of Origin:
China
Brand Name:
Womala
Certification:
.
Model Number:
JEX000030
Product Overview
The Auxiliary Water Pump JEX000030 is a genuine OE-grade component engineered for the fuel-fired parking heater system on select for Land Rover vehicles . This 12V electric pump circulates engine coolant through the auxiliary heater and engine circuit, ensuring the pre-heater warms the coolant evenly before engine start-up — making cold starts easier and reducing emissions .Supersession: JEX000032 → JEX000030
⚠️ Important: This is an auxiliary circulation pump for the fuel-fired heater system — not the main engine water pump. Confirm your vehicle is equipped with the factory parking heater option before ordering.
Key Features
12V electric circulation pump – operates independently of the main engine pump to circulate coolant through the pre-heater circuit
OE-grade quality – Genuine Land Rover part; also available from quality aftermarket suppliers including HELLA, PIERBURG, NRF, First Line, and MEAT & DORIA
Direct-fit replacement – matches factory mounting and 2-pin electrical connector
Parking heater compatibility – required for correct operation of the fuel-fired pre-heater system
OE Cross-Reference
| Primary OE | Superseded | Additional References |
|---|---|---|
| JEX000030 | JEX000032 | 5H2218D474AA, 9017983A |
Aftermarket equivalents: HELLA 8TW358413111 · PIERBURG 7.02671.03.0 · NRF 390088 · First Line FWP3062 · MEAT & DORIA 20306 · SIDAT 5.5033A2
Technical Specifications
| Parameter | Detail |
|---|---|
| Part Type | Auxiliary Water Pump / Coolant Circulation Pump |
| Operating Voltage | 12V |
| Operating Mode | Electric |
| Connector | 2-pin |
| Function | Circulates coolant for fuel-fired parking heater system |
| Condition | Brand New, OE-Grade |
Vehicle Fitment
| Make | Model | Chassis | Years | Notes |
|---|---|---|---|---|
| for Land Rover | Discovery 3 / LR3 | L319 | 2005 – 2009 | With fuel-fired heater |
| for Land Rover | Discovery 4 / LR4 | L319 | 2010 – 2016 | With fuel-fired heater |
| for Land Rover | Range Rover Sport | L320 | 2005 – 2009 | With fuel-fired heater |
| for Land Rover | Range Rover Sport | L320 | 2010 – 2013 | With fuel-fired heater |
Engine compatibility (verify with VIN):
2.7L TDV6 Diesel
3.0L TDV6 / SDV6 Diesel
3.6L TDV8 Diesel
4.4L V8 Petrol
4.2L V8 Supercharged Petrol
5.0L V8 Petrol (NA & SC)
⚠️ Important: This pump is fitted to vehicles with the factory fuel-fired parking heater option. Fitment spans Discovery 3/4 and Range Rover Sport L320 from 2004–2018 .
Signs of Failure
Parking heater not working – pre-heater fails to warm coolant or start
Hard cold starts – engine coolant not pre-warmed as intended
No coolant circulation – pump not operating during heater cycle
Increased emissions – incomplete pre-heating affecting cold-start emissions
💡 A faulty auxiliary pump prevents the parking heater from circulating heated coolant, which can lead to difficult cold starts and increased emissions .
Critical – Verify Your VIN Before Ordering
Auxiliary water pumps are VIN- and option-specific. This pump is for vehicles with the factory fuel-fired parking heater. Provide your VIN – our team confirms exact compatibility before dispatch. We cannot accept returns for misordered parts without VIN verification.
💡 Installation Tip: Professional installation recommended. Inspect the coolant hoses and electrical connector for wear during replacement. Refill with OEM-specified coolant at the correct mixture ratio and bleed the system to remove air pockets.
Why Choose Us
|
Advantage |
Detail |
|---|---|
|
Inventory |
10,000+ SKU in stock |
|
Quality |
OE-grade, fully tested |
|
Warranty |
18-month against manufacturing defects |
|
Shipping |
Global via DHL / UPS / FedEx |
|
Flexibility |
Sample orders welcome, low MOQ |
Contact us for bulk orders or VIN‑checked quotes.
Specifications subject to change; images for reference only.Aftermarket replacement – not affiliated with Jaguar Land Rover.
![]()
![]()
Frequently Asked Questions
A: Signs of a failing bumper bracket include visible damage or deformation, misaligned bumper panels, unusual noises from the front end, or if the bumper appears loose or sagging on one side.
A: For optimal results, we recommend professional installation. Key considerations include ensuring proper alignment of all mounting points, checking for additional damaged components, and verifying all fasteners are properly torqued to specification.
![]()
![]()
Send your inquiry directly to us