Womala Right Front Shock Absorber LR031667 for Land Rover Freelander 2

Product Overview

The Front Right Shock Absorber LR031667 is an OE-grade hydraulic damper engineered for the for Land Rover Freelander 2 / LR2 (L359) from 2006 to 2014. This unit forms the damper element of the front right strut assembly, controlling the rate at which the front coil spring compresses and rebounds. It keeps the tyre loaded against the road surface and limits body movement under braking and cornering .LR026066 and LR001139 are superseded/interchange part numbers for the same damper .

⚠️ Important: This is the right-hand (RH) front damper, supplied without the coil spring. The left-hand counterpart is a separate part number (LR031665) . A VIN break applies: fitment from (V)BH261113 onwards .

Key Features

• Bilstein B4 OE Replacement quality – engineered to maintain original ride quality while meeting or exceeding OE standards 

• Twin-tube gas pressure design – consistent damping performance across temperature and load variations 

• Direct-fit replacement – matches factory mounting points on the Freelander 2 front axle 

• Right-hand specific fitment – designed for the front right corner only 

• Sold individually – always replace in axle pairs to keep damping rates matched side to side 

OE Cross-Reference

💡 Note: LR031667, LR026066, and LR001139 all refer to the same front right damper for Freelander 2 applications .

Technical Specifications

Vehicle Fitment

Engine compatibility (verify with VIN):

• 2.0L Ti-VCT Petrol (204PT) 

• 2.2L TD4 / SD4 Diesel (224DT) 

• 3.2L i6 Petrol (B6324S) 

⚠️ Important: This damper fits all engines on the Freelander 2 (L359) from VIN (V)BH261113 . The right-hand unit is for the passenger side; the left-hand side uses a different part number.

Signs of Failure

• Excessive bouncing – vehicle continues to bounce after hitting bumps 

• Increased braking distance – nose dive under braking 

• Sensitivity to crosswinds – vehicle wanders or feels unstable in side winds 

• Difficulty maintaining trajectory in curves – reduced stability through corners 

• Uneven tyre wear – abnormal wear patterns on front tyres 

💡 Shock absorber wear is gradual. Haynes recommends replacement between 80,000 and 150,000 km, always in pairs .

Critical – Verify Your VIN Before Ordering

Shock absorbers are VIN- and position-specific. VIN break (V)BH261113 applies — confirm your vehicle falls within range . Provide your VIN – our team confirms exact compatibility before dispatch. We cannot accept returns for misordered parts without VIN verification.

💡 Installation Tip: Professional installation recommended. Replace in pairs (both front left and right simultaneously) so damping rates stay matched . When the strut is out, inspect the coil spring, upper mounting, and bump stop — these are typically renewed at the same time if tired . Key torque specs: bolt securing steering knuckle to shock absorber 110 Nm; upper nuts for spring/shock assembly 30 Nm .

Why Choose Us

Contact us for bulk orders or VIN‑checked quotes.

Specifications subject to change; images for reference only.Aftermarket replacement – not affiliated with Jaguar Land Rover.

Frequently Asked Questions

• Extensive Industry Experience: 13 years specializing in Auto Parts auto parts with precise product matching and technical solutions.
• Quality Assurance: 10-stage quality inspection process including durability testing, surface roughness analysis, and dimensional verification.
• Manufacturing Excellence: 15,000㎡ production base with 10,000+ SKUs in inventory for fast order fulfillment.
• Strategic Partnerships: Collaborations with 50+ factories including suppliers to international brands like Womala and Hella.