Place of Origin:
China
Brand Name:
Womala
Certification:
.
Model Number:
LR133579
Product Overview
The PCV Valve Service Kit LR133579 is a genuine OE-grade positive crankcase ventilation (PCV) repair kit engineered for the 3.0L V6 supercharged and 5.0L V8 petrol engines (AJ126 / AJ133) in select for Land Rover and for Jaguar vehicles . This lower-level repair kit contains the rubber diaphragm and pressure control valve cover/cap, allowing replacement of the failed PCV components without replacing the entire camshaft cover assembly . C2D60163 is the Jaguar equivalent part number for the same kit .
⚠️ Important: This is a service kit (diaphragm + cap only) – not a complete valve cover assembly. Two kits are required per vehicle for V8 engines (one per cylinder bank); one kit is sufficient for V6 engines .
Key Features
Lower-level repair solution – replaces only the failed diaphragm and cap, avoiding the cost of a complete camshaft cover assembly
Complete service kit – includes diaphragm, cap, and tension spring
OE-grade quality – manufactured to original equipment specifications; made in Germany
Direct-fit replacement – matches factory pressure control valve housing
Addresses known failure – Land Rover Technical Service Bulletin SSM74374/SSM74375 specifically addresses split diaphragm causing air leaks
OE Cross-Reference
| Land Rover | Jaguar | Aftermarket |
|---|---|---|
| LR133579 | C2D60163 | Britpart 102123488BP |
| 102123488 | — | febi 181384 |
💡 Note: LR133579 (Land Rover) and C2D60163 (Jaguar) are the same PCV service kit. 102123488 is the OEM manufacturer reference number .
Technical Specifications
| Parameter | Detail |
|---|---|
| Part Type | PCV Valve Service Kit / Crankcase Breather Repair Kit |
| Contents | Diaphragm, Cap, Tension Spring |
| Engine | 3.0L V6 SC / 5.0L V8 AJ133 Petrol (NA & SC) |
| Material | FVMQ (Fluorosilicone Rubber), Plastic |
| Quantity Required | V8: 2 kits; V6: 1 kit |
| Condition | Brand New, OE-Grade |
Vehicle Fitment
| Make | Model | Chassis | Years | Engine |
|---|---|---|---|---|
| for Land Rover | Discovery 4 / LR4 | L319 | 2010 – 2016 | 5.0L V8 / 3.0L V6 SC |
| for Land Rover | Discovery 5 | L462 | 2017 > | 3.0L V6 SC |
| for Land Rover | Range Rover | L322 | 2010 – 2012 | 5.0L V8 |
| for Land Rover | Range Rover | L405 | 2013 – 2022 | 5.0L V8 / 3.0L V6 SC |
| for Land Rover | Range Rover Sport | L320 | 2010 – 2013 | 5.0L V8 |
| for Land Rover | Range Rover Sport | L494 | 2014 – 2022 | 5.0L V8 / 3.0L V6 SC |
| for Land Rover | Range Rover Velar | L560 | 2017 > | 3.0L V6 SC |
| for Land Rover | New Defender | L663 | 2020 > | 5.0L V8 |
| for Jaguar | XF, XJ, XK, F-TYPE, XE, F-PACE | Various | 2010 – 2024 | 3.0L V6 / 5.0L V8 Petrol |
Engine details (verify with VIN):
3.0L DOHC GDI SC V6 Petrol (AJ126)
5.0L OHC SGDI NA/SC V8 Petrol (AJ133)
VIN Notes: Discovery 5 3.0L V6 – Solihull from VIN EA000001 / Nitra from VIN K2000001; New Defender V8 – Nitra from VIN M2000001 .
⚠️ Important: This kit is for petrol engines only – not for diesel variants .
Signs of Failure
Check engine light – DTCs P2187, P2189, P0505, P0507 (air intake system leak)
Rough idle or misfire – unbalanced air-fuel mixture
Increased oil consumption – pressure buildup pushing oil into the intake
Oil leaks – from seals/gaskets due to excessive crankcase pressure
Whistling noise – excessive crankcase vacuum
💡 Known Failure: The rubber diaphragm within the pressure control valve splits, causing an air leak from the camshaft cover . This is a documented issue addressed by Land Rover Technical Service Bulletins.
Critical – Verify Your VIN Before Ordering
PCV service kits are engine- and quantity-specific. V8 engines require 2 kits; V6 engines require 1 kit . Provide your VIN – our team confirms exact compatibility and correct quantity before dispatch. We cannot accept returns for misordered parts without VIN verification.
💡 Installation Tip: Professional installation recommended. This is a lower-level repair that replaces the diaphragm and cap on the camshaft cover. Refer to Workshop Manual Section 303-08 (Engine Emission Control) for the PCV cap removal and installation procedure .
Why Choose Us
| Advantage | Detail |
|---|---|
| Inventory | 10,000+ SKU in stock |
| Quality | OE-grade, fully tested |
| Warranty | 18-month against manufacturing defects |
| Shipping | Global via DHL / UPS / FedEx |
| Flexibility | Sample orders welcome, low MOQ |
Contact us for bulk orders or VIN‑checked quotes.
Specifications subject to change; images for reference only.Aftermarket replacement – not affiliated with Jaguar Land Rover.
![]()
![]()
Frequently Asked Questions
A: Signs of a failing bumper bracket include visible damage or deformation, misaligned bumper panels, unusual noises from the front end, or if the bumper appears loose or sagging on one side.
A: For optimal results, we recommend professional installation. Key considerations include ensuring proper alignment of all mounting points, checking for additional damaged components, and verifying all fasteners are properly torqued to specification.
![]()
![]()
Send your inquiry directly to us